| 有效期 |
长期 |
| 类 别 |
灯具 |
| 规格型号 |
|
| 产品数量 |
|
| 地区 |
广东 - 广州 |
| 详细链接 |
|
3M C-Kynar Tubing
销售热线: 020-61136121 //www.gzrongxing.com 联系人：曾先生 13922715087 工作QQ:108272601
Modified Thin Wall Flexible PVDF Tubing
Preliminary Datasheet
Product Description Shrink Ratio
3MTM C-Kynar is flexible heat shrinkable C-Kynar Tubing has a 2:1 shrink ratio. When freely
polyvinylidence fluoride tubing. C-Kynar is excellent recovered, the tubing will shrink to 50% of its original
flame retardant and high temperature resistance. diameter. The recovered wall thickness of the tubing is
C-Kynar is rated for operation at -55oC to 150oC. proportional to the degree of recovery.
Typical Applications Standard Colors
C-Kynar can offer superb abrasion and cut-through Standard color: Clear, Black.
resistance, chemical and solvent resistant properties.
It can reliably protect solder joints, terminals and wire Standard Packaging
splices. The clear appearance makes it easily to inspect Large spools.
the mark on protected harness Cut piece is available base on special request.
Typical Properties
PPr rre eel lli iimmi iinnnaaarrryyy Daaatttaaassshhheeeeeettt
Physical Chemical
Operation Temperature -55oC to +150oC Copper Corrosion No corrosion
Fully Recovery Shrink Temperature 135oC Minimum Water Absorption 0.2%
Tensile Strength 30 Mpa Electrical
Ultimate Elongation 200% Volume Resistance > 1013 ohm-cm
Heat Shock (250°C, 4 hrs) No cracking, no dropping Dielectric Strength 2.5kV/1minutes
Low Temperature Flexibility No cracking
(4 hr. @-55oC)
Flammability Meet VW-1
Note: technical information provided consists of typical product data
and should not be used for specification purposes.
Ordering Information
Order C-Kynar tubing by product name, size equivalent to the expanded inside diameter, package type and color.
Other sizes are available subject to factory quotation. Always order the largest size that will shrink snugly over the
item to be covered.
Example: C-Kynar Black, 1.2/0.6mm.
C-Kynar Size and Dimensions
Ordering Size
Expanded I.D.
(Minimum)
mm
Recovered I.D.
(Maximum)
mm
Total recovered
wall thickness
(Nominal)
mm
Standard
length
m/spool
Standard
color
mm
inch size
For reference
1.2
3/64
1.2
0.6
0.25
200
Clear,
Black
1.6
1/16
1.6
1.6
0.25
200
2.4
3/32
2.4
1.2
0.25
200
3.2
1/8
3.2
1.6
0.25
100
4.8
3/16
4.8
2.4
0.25
100
6.4
1/4
6.4
3.2
0.30
100
9.5
3/8
9.5
4.8
0.30
50
12.7
1/2
12.7
6.4
0.30
50
19.1
3/4
19.1
9.5
0.43
50
25.4
1
25.4
12.7
0.48
50
