有效期 | 长期 |
---|---|
类 别 | 玻璃 - 玻璃原料 - 玻璃胶 |
规格型号 | 480 |
产品数量 | 10000 |
地区 | 广东 - 深圳 |
详细链接 |
“M995A”中性结构胶是一种性能优良的结构硅酮密封胶:1)单组分,室温型,使用方便:2)中性固化,不腐蚀大多数基材; 3)粘结性强,强度高,合理的柔韧性和伸长量;4)具有耐臭氧、耐紫外线等抗老化性能;5)耐高低温性能卓越,在-40℃~150℃的范围内保持弹性;6)适合于玻璃,金属建材,石材,混凝土,砖瓦,陶瓷,塑料间的结构性粘结密封.
使用:
1)施工温度在5℃~40℃之间;
2)用两块布法清洁基材;
3)将胶嘴按需要的大小做45°切断;
4)将胶打满接缝处;
5)约30分钟结皮,应在此前进行修整.
重要:
1)使用前请做材料相容性测试;
2)不用于表面温度(45°C)以上的材料;
3)不用于有渗出物的材料;
4)不用于长期潮湿或完全的密闭环境.
注意:
远离儿童!
避免接触眼睛和皮肤!
如有接触,请用水冲洗;仍然不适的请就医检查.
执行标准:GB/T 16776-2005
保质期:9个月(<24℃)
“MEISHI 995A”is a high performance structural silicone sealant: 1)one-component,room temperature,easy to use;2)neutral curing,no corrosion to the materials;3)excellent adhesion,high strength,appropriate of flexibility and elongation 4)Is the excellent performance of heat and cold, Keep elastic between in low(-45℃) and high(+150℃) temperatures; 5)Suitable for among glass,aluminum material,stone,concrete,brick,ceramic,plastic,structural adhesive and sealing.
DIRECTIONS:
1)Use of temperature between 5℃~40℃;
2)Substrates should be solvent cleaned using two clothes method;
3)Cut the nozzle to desired opening at 45°angle ;
4)Fill the joint completely;
5)Formation of skin in 30minutes,carried out dressing
before use.
IMPORTANT:
1)Be material compatibility testing before use;
2)Do not use in structural applications or where surface temperatures exceed 45℃ ;
3)Should not be used for all Exudation of liquid materials;
4)Should not be use in wet or unventilated and close places.
PRECAUTIONS:
Keep out of the reach of children!
Avoid contact with eyes and skin!
In case of contact,flush with lot water;If still indisposed,consult a doctor.
STANDARDS: GB/T 16776-2005.
DURABILITY: 9 Months(<24℃).