| 有效期 | 长期 |
|---|---|
| 类 别 | 节能环保 - 通用环保设备 - 其它 |
| 规格型号 | |
| 产品数量 | 10 |
| 地区 | 上海 |
| 详细链接 | //www.021fmc.cn/aspcms/product/2018 |
进口化工轴流泵
|
名称：
|
进口化工轴流泵 | |
|
压力：
|
1.0MPa | |
|
型号：
|
GR | |
|
口径：
|
DN250-DN900 | |
|
材质：
|
304、316 |
- 质量：从铸件到产品，实行全过程质量监控，全方位检测，责任到人！
- 价格：高效成本控制，自产自销，减少中间环节，让利于客户！
- 交货：充足的库存，上海便捷物流，缩短交货期，严格按照合同期交货！
图文传真：021-69519069
服务电话：13524269805
英国GRIMM格林进口化工轴流泵 UK GRIMM Imported axial flow pump
英国GRIMM格林进口化工轴流泵概述：
进口化工轴流泵是英国格林自行研制开发的新产品，按口径分：250、300、350、450、500、600、700、800、900共9个型号，18个规格产品。可靠性好，维修方便，是专为氯碱、制盐中蒸发循环工程的特点而专门设计的轴流泵。借鉴了行业内的成功技术，并融入自身的设计所长，经优化的传动设计，运行振动小，噪音低，大幅提高了轴流泵的运行可靠性和平衡性，使维护周期和使用寿命大大增加。运行可靠性高，维护周期增加一倍以上，寿命增加20%。
可输送化学中性和腐蚀性，冷的或热的，清洁的或污染的，悬浮液或有大量结晶颗粒的腐蚀性液体。
英国GRIMM格林进口化工轴流泵结构特点：
参照升力线理论，吸取螺旋桨设计的经验，发展了沿径向变环量分布的轴流泵设计方法，并进行了厂内的模型试验，与同类型轴流泵相比，重量轻，体积小，刚性好，效率高(与英国格林第一代化工轴流泵相比，效率提高10%以上，重量减轻30%以上)。自驱动端看，泵为逆时针旋转。
英国GRIMM格林进口化工轴流泵设计特点：
进口化工轴流泵，采用悬臂式支撑型式，单级单吸轴流式叶轮，电机采用直联或皮带传动。采用后开门的结构，使得在检修或更换密封时，只要抽出转动部分即可，而不需要拆卸管路，因此具有维修方便的特点。密封型式可采用双端面机械密封或填料密封。泵体采用弯管式或蜗壳式结构，泵进出口口径相同。轴承箱体带有水冷腔，用以通冷却水冷却轴承。对于悬挂式结构或弹性基础式的轴流泵为特殊设计。
英国GRIMM格林进口化工轴流泵技术参数：
流 量：200～12000m3/h
扬 程：2～12m
转 速：580～1450r/min
功 率：7.5～250KW
口 径：250～900mm
设计压力：0.4MPa
工作压力：1.0MPa
工作温度：-0～180℃
英国GRIMM格林进口化工轴流泵密封：
密封腔处的径向振摆小于0.5mm，保证了密封的可靠性和耐久性，延长了维修周期。可以安装填料密封和单端或双端机械密封，并可安装动力密封以供特殊场合使用。
固定密封选用Viton等合成橡胶。
填料选用石棉、碳纤维、柔性石墨等优质耐腐减磨材料。
英国GRIMM格林进口化工轴流泵材质：
过流部件可用1Cr18Ni9，1Cr18Ni12Mo2Ti，1Cr18Ni12Mo3Ti，因科洛804等多种材质制造。输送温度为0～180℃的各种强腐蚀材质。
英国GRIMM格林进口化工轴流泵用途：
输送低温或高温液体；中性或有腐蚀的液体；清洁的或内含固体颗粒的液体。
特别适用于：
1、化工和石油化学工业
2、炼油厂、造纸厂、纸浆业、煤化工、发电厂、制药业、制糖业、炼钢厂、水处理
3、涂装行业(脱脂、磷化、电泳等工序)
UK GRIMM Imported axial flow pump summary:
Imported chemical axial pump is a new product developed by Green in Britain. It is divided into 9 models and 18 specifications according to the caliber: 250, 300, 350, 450, 500, 600,, 700, 800, and 900. The utility model has the advantages of good reliability and convenient maintenance, and is an axial-flow pump specially designed for the characteristics of evaporation and circulation engineering in chlor alkali and salt making. Based on the success in the technology industry, and into the design director of itself, by driving the optimization design and operation of small vibration, low noise, greatly improves the reliability and balance of the axial flow pump, the maintenance period and the service life is greatly increased. The operation reliability is high, the maintenance cycle is more than doubled, and the service life is increased by 20%.
A corrosive liquid capable of delivering chemical, neutral, corrosive, cold, or hot, clean or contaminated, suspended, or a large amount of crystalline particles.
UK GRIMM Imported axial flow pump structure characteristics:
According to the lifting line theory, draw propeller design experience, the development of the design method of axial flow pump with variable circulation distribution along the radial direction, and the model test is carried out and compared with the same type of axial flow pump has the advantages of small size, light weight, good rigidity, high efficiency (compared with the British first generation Green chemical axial flow the pump efficiency is increased by more than 10%, weight more than 30%). As viewed from the drive side, the pump rotates counter clockwise.
UK GRIMM Imported axial flow pump design features:
Imported axial flow pump adopts cantilever support type, single stage single suction axial flow impeller. The motor adopts straight belt or belt drive. The utility model adopts the structure of a back door, so that when the seal is repaired or replaced, only the rotating part can be drawn out, and the pipe is not needed to be disassembled, so the utility model has the advantages of convenient maintenance. Sealing type can use double end mechanical seal or packing seal. The pump body adopts a bent pipe type or a volute type structure, and the inlet and outlet of the pump have the same caliber. The bearing housing is provided with a water cooling cavity for cooling the bearing by cooling water. For the suspension structure or elastic foundation type axial flow pump for the special design.
UK GRIMM Imported axial flow pump technical parameter:
Flow rate: 200 ~ 12000m3/h
Lift: 2 ~ 12m
Speed: 580 ~ 1450r/min
Power: 7.5 ~ 250KW
Caliber: 250 ~ 900mm
Design pressure: 0.4MPa
Working pressure: 1.0MPa
Operating temperature: -0 ~ 180 DEG C
UK GRIMM Imported axial flow pump seal up:
The radial vibration pendulum at the sealing cavity is less than 0.5mm, which ensures the reliability and durability of the seal and prolongs the maintenance period. Packing seals and single or double end mechanical seals can be installed, and power seals can be installed for special occasions.
Viton and other synthetic rubber are used in the fixed seal.
Fillers are made of asbestos, carbon fiber, flexible graphite and other corrosion-resistant materials.
UK GRIMM Imported axial flow pump texture of material:
The flow components available 1Cr18Ni9, 1Cr18Ni12Mo2Ti, 1Cr18Ni12Mo3Ti, and other materials for colo 804 manufacturing. A variety of strong corrosion materials with a temperature of 0~180.
UK GRIMM Imported axial flow pump purpose:
Imported axial flow pumps are mainly used in large flow and low lift occasions, especially for forced circulation processes with corrosive media. For example, the mandatory cycle of caustic soda and salt production is also applied to phosphate fertilizer, oil, chemical fiber, paper making, and other production sectors.
进口化工轴流泵☞官网：//www.021fmc.cn/aspcms/product/2018-5-7/1292.html
GRIMM中国：
上海秉奇阀门有限公司为GRIMM公司在中国的总代理，是中国拥有GRIMM代理权及销售权，主要为中国地区客户提供服务与技术支持，同时，秉奇人员也积极参与总部技术培训学习，并不断掌握产品原理、实际运作、工程技术做为基石，完善对中国地区客户需求。
关于GRIMM：
英国格林（GRIMM）国际有限公司是亚太地区流体控制领域的主要生产和供应商之一，公司总部位于克莱福德，拥有一支有经验的研发队伍，实行全球统一设计，统一标准，在水泵领域内处于领先地位。在许多个国家均有生产水泵基地，中国由上海秉奇阀门负责中国市场各项业务与技术支持中心，同时向中国市场销售。
英国格林（GRIMM）产品已广泛应用于市政给排水、建筑、石油、化工、液化气、食品、制药、发电、冶金、矿产、锅炉蒸汽系统、压力容器、原子能、航空、火箭等各领域，以及人们日常生活中。
英国格林（GRIMM）主要产品有：管道泵、离心泵、隔膜泵、磁力泵、真空泵、潜水泵、排污泵、计量泵、卫生级泵、罗茨风机等系列产品。
服务体系：
GRIMM品质：
GRIMM公司注重产品质量及使用寿命，全部采用先进制造技术和生产设备，并坚持不懈研发新产品，为确保不间断的全过程质量控制，在生产过程中采用(SPC)过程控制和(TQM)全面质量管理；GRIMM的严格规范实现了不让品质拖节，有效保障产品每个细节达到的性能指标。
GRIMM专业：
掌握核心的流体控制技术，提供市场领先的产品、服务和解决方案，帮助用户提高效率，带来至关重要的基础设施。
GRIMM服务：
我们与用户紧密合作，支持一系列系统使用技术和文件报告，提供售前、售中、售后服务和技术支持，有了您的信任与支持，我们将更完善、更高效提供水泵流体技术方案。
GRIMM china:
Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.
About GRIMM:
Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.
Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.
Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.
Service system:
GRIMM quality:
GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.
GRIMM major:
Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.
GRIMM service:
We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.
英国格林总代理商：上海秉奇阀门有限公司，微信咨询：
Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:
Welcome new and old customers call negotiate!
Contacts：Huang Tianxiang
QQ：673088832
Mobile Phone:13524269805 (微信同号）
Company Phone:021-51698378
Add:Lane 51, dragon road, Shanghai, Xuhui District