| 有效期 | 长期 |
|---|---|
| 类 别 | 玻璃 - 玻璃原料 - 玻璃胶 |
| 规格型号 | 300 |
| 产品数量 | 10000 |
| 地区 | 广东 - 深圳 |
| 详细链接 |
"美氏M6361"酸性硅酮密封胶是一种酸性固化的高性能密封胶:1)固化迅速;2)固化收缩率低;3)在低温(-45℃)至高温(+164℃)内保持良好弹性;4)柔软抗震,耐变形;5)对于多数基材有良好的兼容性;6)用于各类门窗安装.
说明:
1)施工温度在5°C~40°C之间;
2)用两块布法清洁基材;
3)将胶嘴按需要的大小做45°切断;
4)将胶打满接缝处;
5)10分钟内结皮.
重要:
1)使用前请做材料相容性测试;
2)不用于铜,锌和砖石材料;
3)不用于幕墙结构性装配或表面温度(45℃)以上的材料;
4)不用于渗出油污或溶剂的材料；
5)在足够通风条件下使用.
注意:
远离儿童!
避免接触眼睛和皮肤!
如有接触,请用水冲洗;仍然不适的请就医检查.
执行标准: GB/T14683-2003.
保质期: 7个月(<24℃)
"MEISHI M6361" acidity silicone sealant is a acidic curing high performance grade silicone sealant:1)Rapid solidification;2)Low shrinkage on curing;3)Keep elastic in low(-45℃) and high(+164℃) temperatures;4)High grade soft,be able to bear oscillation;5)Good adhesion to many substrates;6)Applicable to the assembly of various doors and windows.
DIRECTIONS:
1)Construction applicable between 5℃~40℃;
2)Substrates should be solvent cleaned using two clothes method;
3)Cut the nozzle to desired opening at 45°angle ;
4)Fill the joint completely;
5)Formation of skin in 8 minutes.
IMPORTANT:
1)Please do material compatibility testing before use；
2)Not for copper,zinc and stone;
3)Do not use in structural applications or where surface temperatures exceed 45℃ for material safety;
4)Incompatible oozing out oily or solvents;
5)Apply in Plenty of air.
PRECAUTIONS:
Keep out of the reach of children!
Avoid contact with eyes and skin!
In case of contact,flush with lot water;If still indisposed,consult a doctor.
STANDARS: GB/T 14683-2003.
STORAGE: 7 Months(<24℃).